background image

 

Chapter 2:  System Settings

81

Figure 2-6.   

Blockable User Settings (

Settings

 > 

Mailbox

)

 

Mailbox enabled field

:  This setting allows users to enable their voicemail. In 

situations where voicemail is not used, such as call centers, this setting is not 

needed.

 

Time until mailbox picks up

:  This setting allows users to set their own mail-

box pickup time and to allow their phone to ring for longer periods of time 

before it goes to voicemail.

 

Maximum number of messages

:  This setting allows users to set the number 

of message that will be saved in their mailboxes.  If space is an issue, adminis-

trators may want to place their own limit on this setting and prevent the user 

from changing it.

 

Mailbox escape account

:  This setting gives users the option to change the 

direction of a call once the caller presses 0 to speak with the operator (calls are 

redirected to the escape account).  In many cases, users will not have the op-

tion of directing their calls to another extension and will not need this setting.

Summary of Contents for ONE IP














































































































































































































































Reviews: