Appendix C: snom ONE and Exchange
533
Add the Exchange Gateway to Your Current Dial Plan
1. From the
Dial Plans
tab, click the edit icon next to your dial plan.
2. From the dropdown in the top entry, select
MS-Exchange
.
3. Enter
7*
as the pattern and
*
as the replacement.
Note
: The digit(s) that are entered into the pattern field must match the digit(s)
that were used in the
External Voicemail System
field (
Domain
>
Settings
).
For example, if you used
99$u
in that field, then you can use
99*
as the pat-
tern in the dial plan.
4. Click
Save
.
Set the snom ONE External Voicemail System
The redirection target should be a telephone number, rather than a SIP URI, and it
must be possible to dial that number through the dial plan (the extension must have the
permission to do that). The replacement fields known from the caller-ID representation
in the trunks can be used (e.g., in the image shown below,
$u
will be replaced with the
extension number). The redirection to the mailbox works only if the mailbox is enabled
for that account.
1. Go to the voicemail settings in the domain, and clear the
Mailbox Direct Dial
Prefix
field; otherwise, it will interfere with the mailbox redirection logic and
create an endless redirection loop.
Summary of Contents for ONE IP
