UK • 22
Troubleshooting
Replacing the fuse in the car charger.
If the unit stops operating first check the fuse in the cigarette lighter plug.
If the fuse has blown, follow these steps and replace it with a 2 amp, 6
x 30mm fast blow fuse. Caution: Using a fuse that does not meet these
ratings or removing fuse protection can damage your unit, the power
cable, or the vehicles electrical system
1. Grasp the ring near the tip of the cigarette lighter plug, and then
carefully unscrew the ring by turning it counter clockwise.
Caution: If you must use pliers to loosen the ring, be careful not to
crush the tip. Never use pliers or other tools to retighten the ring on the
cigarette lighter plug.
2. Pull the ring straight out, then remove the metal tip, spring and old
fuse.
3. Check the fuse to see if it has blown. If it has, replace it.
4. Replace the metal tip and spring inside the ring, then place the fuse
inside the cigarette lighter plug and screw the ring back onto the
plug. Make sure the metal tip is visible when you reassemble the
cigarette lighter plug
Summary of Contents for DVR-1HD
