Installing the BATTERY, SIM Card, & Optional Micro SD
The Snapfōn® ezTWO is a GSM phone, and requires a SIM card to
operate. The SIM card is a small removable chip that stores your
contacts and links the handset to your cellular service.
• If you ordered your Snapfōn® with service, the SIM card has
already been installed.
• If you intend to use another carrier’s service, you will need to
install their SIM card.
To Install the SIM Card:
1. Remove the back cover of your Snapfōn®. See Figure 3A.
2. Insert Micro SD card. See Figure 3B.
3. Install the SIM card as shown.See Figure 1.
4. Install the Battery as shown. See Figure 2.
5. Replace the back cover.
Once you have completed these steps, hold down the
red End Call/Power Button on the keypad for 3-5 seconds to turn
the phone on. Within a few seconds, the phone will recognize the
SIM card. You will be able to confirm you have successfully
installed an active SIM card if the Signal Status Indicator shows
any number of bars, and the name of your service will be
displayed above the Time & Date (see page 10, box 4).
38