110
Snorkel International, LLC
2009 Roseport Road
Elwood, KS 66024
Model: Snorkel SR5719
Part Number: 159-0074-000
Version: Stage 5 / Open Cab
n.
CHECKING THE HYDRAULIC OIL LEVEL
The hydraulic oil level in the tank in the rear left part must be
periodically checked. This is possible by observing the
indicator on the storage tank. When the float is at the level
indicated by the arrow, the hydraulic oil needs to be topped
up. This will be signalled by a light in the cab.
Attention: operating the machine with a level of hydraulic oil
below the limit value may seriously damage the machine and
its parts. Use only the hydraulic oil indicated by the
manufacturer.
o.
HYDRAULIC OIL CHANGE
This operation must only be performed by qualified personnel.
Proceed as follows to change the hydraulic oil:
1.
Locate the drain plug under the tank near the rear axle (wheel behind the cab) (1).
2.
Place a container (with approximate capacity of 80 litres) under the drain plug (1).
3.
Unscrew the fill cap of the oil tank (2).
4.
Unscrew the drain plug and remove it (1).
5.
Wait for all the oil to drain.
6.
Re-tighten the drain plug (1) with a tightening torque of 15 Nm.
7.
Remove and replace the immersed hydraulic oil filter in intake (3) (you must insert your hand into
the tank through the hole where the oil filter is installed in return (4) after having removed it).
8.
Fill the hydraulic oil tank according to the specifications.
9.
Screw the oil tank fill cap back on (2).
Summary of Contents for SR5719
Page 159: ......
