background image

Lit. No. 85757, Rev. 01 

November 15, 2018

PREFACE

This manual has been prepared to acquaint you with 
the safety information, operation, and maintenance of 
your new machine. Improper installation and operation 
could cause personal injury and/or equipment and 
property damage. Read and understand the Owner's 
Manual before installing, operating, or making 
adjustments. Keep this manual accessible.

When service is necessary, call SnowEx

®

 Technical 

Service at 1-800-SALTERS (725-8377).

NOTE: This unit is designed to be used with 
salt brine; the use of additives may impact 
performance.

NOTE: Do not modify or alter the machine. 
Altering the unit in any way will void the warranty.

OWNER'S INFORMATION

Owner's Name: ______________________________________________________________________

Date Purchased: _____________________________________________________________________

Outlet Name: ______________________________________________  

Phone: _________________

Outlet Address: ______________________________________________________________________

Vehicle Model: _______________________________________________  

Year: _______________

Equipment Model: ____________________________________   Serial #: ______________________

Length: ________________________  Weight: 

__________________   lb/kg: 

_________________

The Accuspray™ De-Icing System is designed to 
apply brine to pre-treat, anti-ice, and post-treat parking 
lots and roadways. Each unit consists of a holding 
tank, pumping system and control, and a spray boom.

WARRANTY REGISTRATION

Warranty registration is available online at 

www.snowexproducts.com

. Under "Support" click 

"Warranty Registration" and submit the form online.

Summary of Contents for Accuspray VSS-1000-1

























Reviews: