Lit. No. 74419, Rev. 01
12
November 1, 2017
ASSEMBLY
SPRAYER ASSEMBLY
1. Remove spray wand from its packaged storage
location on the tank base assembly.
2. Install the handle assembly to the tank base
assembly using the provided 5/16" cap screws
and nylon locknuts.
3. Plug the switch harness on the handle assembly
into the pump harness on the tank base assembly.
4. Insert the spray wand into the spray wand bracket
on the underside of the handle assembly.
5. Remove, reverse, and reinstall the nozzle bracket
on the front of the unit. Be sure the spray opening
on the nozzle body is pointing down.
Packaged State
Installed State
TIRE INFLATION
Tires are not fully in
fl
ated when shipped. In
fl
ate tires
with a manual pump.
WARNING
Use safety glasses and gloves when in
fl
ating
and installing the tires. Use manual pump
only to in
fl
ate. Refer to the tire sidewall for
manufacturer's recommended pressure. Do
not exceed the maximum in
fl
ation pressure.
