19
765042231 Rev.000
PRE-COOLING CYCLE
It is advisable to run a cooling cycle prior to selecting any cooling cycle
.
CHILL
Press
CHILL
for 1 sec to run the pre-cooling cycle
The
icon blinks
The pre-cooling cycle continues once the temperature of -25 °C is reached in the chamber, the
remains
steady, and the buzzer is activated for 1 sec.
CORE PROBE POSITIVE SOFT QUICK COOLING CYCLE
WARNING: insert the needle probe correctly to run a temperature-controlled cycle.
CHILL
Press the
CHILL
key to select a core probe positive Soft QC
The
and
icons blink
The display shows the room probe temperature setpoint during QC
Press
or
within 15 seconds to change the value
Use the
and
keys to change the value
Press the
key to start the cycle
The
and
icons remain steady: the test is run to verify the insertion of
the core probe
The cycle is run when the test is completed successfully; otherwise, a time-
controlled positive soft chilling cycle will start. The
and
icons remain on.
CORE PROBE POSITIVE HARD QUICK COOLING CYCLE
WARNING: insert the needle probe correctly to run a temperature-controlled cycle.
CHILL
Press the
CHILL
key to select a core probe positive Soft QC
The
and
icons blink
HARD
Press the
HARD
key to select a core probe positive Hard QC
The
HARD
icon blinks
The display shows the room probe temperature setpoint during QC
Press
or
within 15 seconds to change the value
Use the
e
keys to change the value
