SNOWJOE iON15SB-CT, Operator'S Manual

4

6. 

Protect batteries from overheating. Overloads, 

overcharging and exposure to direct sunlight will result 

in overheating and cell damage. Never charge or work 

with batteries that have been overheated – replace them 

immediately, if possible.

7.  Store the charger and your cordless tool only in dry 

locations with an ambient temperature of 50-104°F  

(10-40°C). Store your lithium-ion battery pack in a cool, 

dry place at a temperature of 50-68°F (10-20°C). Protect 

the battery pack, charger and cordless tool from humidity 

and direct sunlight. Only place fully charged batteries in 

storage (charged to at least 40%).

8.  Prevent the lithium-ion battery pack from freezing. Battery 

packs that were stored below 32°F (0°C) for more than 60 

minutes must be discarded.

9. 

When handling batteries, be wary of electrostatic charge. 

Electrostatic discharges can damage the electronic 

protection system and the battery cells. Avoid electrostatic 

charging and never touch the battery poles.

Additional Safety Instructions

Safety Instructions for Walk-Behind 

Snow Blowers

• 

Read the operator’s manual carefully – Learn your snow 

blower

’s applications and limitations as well as the specific 

potential hazards related to this machine. Do not use this 

machine for any purpose other than the one for which it 

was designed. Failure to adhere to these precautions may 

cause mechanical defaults, serious damage, or personal 

injury.

• 

Preliminary unit inspection – Thoroughly inspect the 

unit before use. Make sure all the parts are secure and 

installed correctly. If you notice any abnormalities, do not 

use the machine until it has been properly repaired. Always 

perform a test run the first time you use the snow 

blower 

or after replacing parts to ensure that the unit is functioning 

properly.

• 

Preliminary area inspection – Clear the area to be plowed 

before each use. Remove all objects such as rocks, broken 

glass, nails, wire, or string, which can be thrown by or 

become entangled in the snow blower. Keep the area of 

operation clear of all persons, children, and pets.

• 

Excessive force – The snow blower was designed to 

respond at a certain rate for various snow conditions for 

optimal safety and performance. Do not force it; keep the 

applied pressure constant throughout its operation.

• 

Malfunctioning switch – Do not use the snow blower if 

the switch does not turn it on and off. Any 

appliance that 

cannot be controlled by the switch is not safe to use and 

must be repaired.

• 

Hitting an object – If the snow blower accidentally strikes 

an object, first stop the snow blower and remove the 

battery; next, inspect for damage; finally, repair or replace 

any damaged part before restarting and operating the  

snow blower.

• 

Discharge chute safety – Never direct the snow discharge 

chute at the operator, at bystanders, at vehicles,

 or at 

windows. 

The discharged snow, which may contain foreign 

objects accidentally picked up by the snow blower, can 

cause serious damage and personal injury. Do not use your 

hands to unclog the discharge chute. Stop the motor before 

removing debris.

• 

Hand-held operating position – Operation of the snow 

blower in the hand-held position is unsafe.

• 

Abnormal operation – 

If you find that the snow blower 

is not running properly or hear abnormal sounds from the 

engine, immediately stop the machine, remove the battery, 

and contact an authorized Snow Joe

®

 + Sun Joe

®

 dealer or 

call the Snow Joe

®

 + Sun Joe

®

 customer service center at 

1-866-SNOWJOE (1-866-766-9563) for assistance.

• 

Noise control – When using the 

snow blower,

 respect 

the local laws and regulations regarding noise control and 

environmental protection. To avoid noise disturbance, you 

should carefully decide upon an appropriate operation time 

and consider the surrounding conditions.

• 

When work is completed –  Remove the battery pack 

from the snow blower when not in use

, when changing 

accessories, and before performing any maintenance 

task.

• 

Store safely – Store the snow blower indoors in a dry area 

between uses. Keep in a locked area, where children and 

unauthorized users cannot gain access. Never store the 

snow blower with the battery pack installed. It may cause 

damage and injury.

• 

Maintain for safety and longevity – Check for 

misalignment or binding of moving parts, breakage of 

parts, and any other conditions that may affect the unit’s 

operation. If damaged, repair or replace the damaged part 

before use. Use only those replacement parts made for your 

model. When replacing any parts, you must strictly observe 

the instructions and procedures described in this manual. 

Special care should be paid to any rubber parts, since 

these parts may increase the engine load and decrease its 

mechanical power if damaged.

Electrical Safety

• 

Electrical plugs must match the outlet – Never modify 

the plug in any way. Do not use any adapter plugs with 

grounded appliances. Unmodified plugs and matching 

outlets will reduce the risk of electric shock.

• 

Avoid accidental starting – Make sure the safety switch 

and the switch lever is in the OFF position before inserting 

the battery pack into the unit. Do not carry the snow blower 

with the safety switch and switch lever engaged.