SNOWJOE iON18SB-HYB, Operator'S Manual

© 2015 by Snow Joe

®

, LLC

All rights reserved. Original instructions.

A Division of Snow Joe

®

, LLC

Model iON18SB-HYB

OPERATOR’S MANUAL

SAVE THESE INSTRUCTIONS

CO ELECTRIC HYBRID SNOW BLOWER 

18-INCH | 40 V MAX

* 

| 13.5-AMP

Form No. SJ-iON18SB-HYB-880E-MR3

IMPORTANT!

Safety Instructions
All Operators Must Read These 

Instructions Before Use

Read all instructions when using hybrid snow blowers.  

Basic safety precautions should always be followed to reduce 

the risk of fire, electric shock, and personal injury. 

General Safety Rules

Notice the personal safety alert symbol 

m

 used in this 

manual to draw your attention to a WARNING given along 

with the particular operating instruction. This means that 

the operation requires special ATTENTION, CAUTION, and 
AWARENESS.

• 

Keep work area clean and well lit –

 Cluttered, dark areas 

invite accidents.

• 

Keep bystanders away – All bystanders and pets should 

be kept a safe distance away from the work area. 

• 

Dress properly – 

Do not wear loose clothing or jewe

lry. 

They can get caught in moving parts. Protective rubber 

gloves and non-slip footwear are recommended when 

working outdoors.

• 

Use the right product – Do not use this machine for any 

job except that for which it is intended.

• 

m

CAUTION! –

 Exercise caution to avoid slipping or falling. 

Wear protective footwear that will protect your feet and 

improve your footing on slippery surfaces.

• 

Use safety glasses –

 Also use safety footwear, snug-fitting 

clothing, protective gloves, hearing and head protection. 

• 

Stay alert – Watch what you are doing. Use common 

sense. Do not operate the snow blower when you are tired 

or 

under the influence of alcohol or drugs.

• 

Do not overreach –

Keep proper footing and balance at  

all times.

• 

Store indoors –

 When not in use, the snow blower should 

be kept dry and stored out of the reach of children in a high 

or locked place.

• 

Maintain snow blower with care – Follow instruction for 

maintenance and changing accessories.

m

WARNING!

 Turn off the power switch, remove the 

battery, and disconnect the power cable before making any 

adjustments, inspecting, servicing, changing accessories, 

cleaning the snow blower, or when any other dangerous 

conditions present. Any such operation should be performed 

after revolving parts inside the snow blower stop completely. 

Such preventive safety measures reduce the risk of starting the 

power tool accidentally.

m

WARNING! 

When replacing any parts, you must strictly 

observe the instructions and procedures described in this user 

manual. Special care should be paid to any rubber parts, since 

these parts may increase the engine load and decrease its 

mechanical power if damaged.

m

WARNING! 

If you notice that the snow blower is not 

running properly or hear abnormal sounds from the engine 

when it is in use, immediately stop the machine, remove the 

battery, disconnect the power cable, and contact the 

Snow Joe

®

 + Sun Joe

®

 customer service center at 

1-866-SNOWJOE (1-866-766-9563) for assistance.

• 

Surfaces – This snow blower is intended for use on 

paved surfaces. Do not use on gravel, stone or other 

unpaved surfaces unless the snow blower is adjusted for 

such surfaces according to the instructions given in the 

operator’s manual.

• 

Moving parts present risks –

 Keep your face, hair, 

clothing, hands, and feet away from moving parts. All 

guards and safety attachments must be installed properly 

before using the unit. Shut off and disconnect the battery 

or power cord before touching any parts other than the 

handles and switch.

• 

Avoid unintentional starting – Make sure the safety switch 

and the switch bar lever are in the off position before 

inserting the battery in the unit or plug in the cord. Do not 

carry the snow blower with the safety switch and the switch 

bar lever engaged.

• 

Do not overreach – Maintain proper footing and balance 

at all times. Place heels firmly on the ground and tightly 

grasp the handle bar. Watch for uneven surfaces and do not 

overreach. In case you fall or collide with the snow blower, 

inspect the unit for any damages or cracks. When stepping 

backwards, be careful to avoid obstacles beneath 

your feet 

or behind you to avoid falling.

m

WARNING! 

If the snow blower strikes any object, 

follow these steps:

  i)   

Stop the snow blower, remove the battery and/or 

     disconnect the power cable;

  ii)  Inspect for damage;
 iii) Repair any damage before restarting and operating  

     the snow blower.

1