SNOWJOE iON18SB-HYB, Operator'S Manual

9

Unpacking

Carton Contents:

•  Hybrid snow blower with handle
•  EcoSharp

®

 40 V 4.0 Ah battery

•  EcoSharp

®

 40 V battery charger

•  Handle knobs/Deflector knobs (4)
•  Square J-bolts (2)
•  Carriage bolts (2)
•  Rubber washers (2)
•  Manual with registration card

1.  Carefully remove the hybrid snow blower and check to 

see that all of the above items are supplied.

2.  Inspect the product carefully to make sure no breakage or 

damage occurred during shipping. If you find damaged or 

missing parts, DO NOT return the unit to the store. Please 

call the Snow Joe

®

 + Sun Joe

®

 customer service center at 

1-866-SNOWJOE (1-866-766-9563).

  NOTE: Do not discard the shipping carton and packaging 

material until you are ready to use the hybrid snow blower. 

The packaging is made of recyclable materials. Properly 

dispose of these materials in accordance with local 

regulations or save the packaging for long-term product 

storage.

IMPORTANT! The equipment and packaging material are  

not toys. Do not let children play with plastic bags, foils 

or small parts. These items can be swallowed and pose a 

suffocation risk!

Assembly

Assembling the handles

1. 

For easy assembly, the snow blower comes equipped with 

most of the parts already connected. In just a few simple 

steps, your snow blower will be ready to go. To engage 

the handle, pull up on the upper frame (Fig. 1).

2.  Secure the connection of the middle handle assembly to 

the upper handle by fastening the handle locks on each 

side (Fig. 2).

3.  Secure the connection of the middle handle assembly 

to the lower handle using 2 handle knobs and 2 square 

J-bolts and tighten on each side (Figs. 3 & 4).

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Handle knob

Square 

J-bolts