SNOWJOE Martha Stewart MTS-EBS215, Operator'S Manual

Model MTS-EBS215

Form No. SJ-MTS-EBS215-880E-M

OPERATOR’S MANUAL

ELECTRIC BLOWER

10 AMP | 2-SPEED | ALL-PURPOSE

© 2018 by Snow Joe

®

, LLC

All rights reserved. Original instructions.

SAVE THESE INSTRUCTIONS

1

IMPORTANT!

Safety Instructions
All Operators Must Read These 

Instructions Before Use

Any electrical appliance can be dangerous if used incorrectly. 

Some of the safety precautions given in this manual apply 

generally to many appliances. Other warnings are specific to 

the use of this electric blower.
Always follow these safety guidelines. Failure to do so may 

result in serious bodily injury or death.

m

DANGER! 

This indicates a hazardous situation, which,   

if not followed, will result in serious injury or death.

m

WARNING! 

This indicates a hazardous situation, which, 

if not avoided, could result in serious injury or death.

m

CAUTION! 

This indicates a hazardous situation, which, 

if not avoided, could result in minor or moderate injury.

General Safety
FOR HOUSEHOLD USE ONLY

Before using, be sure that everyone using this tool reads 

and understands all safety instructions and other information 

contained in this manual. Save this manual and review it 

frequently prior to using this tool and when instructing

others on the proper operating procedures.

m

CAUTION!

 Wear appropriate hearing protection during 

use. After long periods of extended use, the noise generated 

from this appliance may cause hearing loss if your ears are  

not properly protected.

m

WARNING! 

When using electric yard tools, basic safety 

precautions should always be followed to reduce the risk of 

fire, electric shock, and personal injury, including the following: 

1.  Keep work area clean and well-lit – 

Cluttered, dark 

areas invite accidents. 

2.  Replacement parts – 

When servicing this unit, use only 

identical replacement parts. Replace or repair damaged 

cords immediately.

3.  Keep children, bystanders, and pets away –

 All 

spectators, including pets, should be kept a safe distance 

away from the work area.

4.  Dress properly –

 Do not wear loose clothing or jewelry 

as such articles can get caught in moving parts. Wear a 

protective covering to contain long hair. Wearing rubber 

gloves and substantial non-slip footwear is recommended 

when working outdoors.  

5.  Extension cords –

 To prevent electric shock, use only 

with an extension cord suitable for outdoor use.

6.  Avoid accidental starting –

 Do not carry the blower with 

your finger on the switch. Make sure the switch is off 

before plugging in the unit.

7.  Do not abuse the cord – 

Never carry the blower by the 

cord or yank the cord to disconnect it from the receptacle. 

Keep the cord away from heat, oil, and sharp edges.

8.  Moving parts –

 Keep hands and feet away from moving 

parts. Keep guards in place and in proper working order.

9.  Do not force the tool –

 It will perform better with less 

likelihood of personal or mechanical injury if it is used at 

the rate for which it is designed.

10.

Wear personal protective equipment – 

When using this 

tool, wear safety glasses with side shields or goggles to 

provide necessary eye protection. Wear ear defenders to 

prevent hearing damage. Use a face or dust mask if the 

work environment is dusty.

11. Disconnect the tool – 

Disconnect the blower from the 

power supply when it is not in use, before servicing it, 

when changing accessories, and when performing any 

other maintenance task.

12.

Store idle tool indoors – 

When not in use, the blower 

should be stored indoors in a dry and high or locked-up 

place out of the reach of children.

13. Maintain the blower with care – 

Keep the blower tube 

and the fan area clear and clean for optimal performance 

and to reduce the risk of injury. Inspect the extension 

cord periodically and immediately replace it if damaged. 

Keep the handle dry, clean, and free from oil and grease. 

Follow the additional recommendations described in the 

maintenance section of this manual.

14. Ground fault circuit interrupter (GFCI) 

protection should 

be provided on the circuit(s) or outlet(s) that are to be used 

for the blower. Receptacles are available having built-in 

GFCI protection and may be used for this measure of 

safety.

15. Use the right tool – 

Do not use the tool for any job except 

that for which it is intended.