12
Storage
Follow the steps below to prepare the electric wood c
shredder for storage:
1.
Disconnect the power supply to the wood c shredder.
2.
Clean the wood c shredder with a damp cloth or
hand brush.
3.
Inspect the wood c shredder carefully for worn,
loose, or damaged parts. Check connections and screws
and tighten if necessary. Pay special attention to the blade
and replace if it shows signs of wear. Refer to the Care +
Maintenance section.
4.
Store the wood c shredder indoors in a dry, clean,
and cool area out of the reach of children. Do not store the
unit next to corrosive materials, such as fertilizer and rock
salt.
5.
Wipe the extension cord to remove any foreign
substances, such as oil or stains. Replace the extension
cord immediately if it is cut or damaged in any way.
6.
Do not cover the wood c shredder with a solid
plastic sheet. Plastic coverings trap moisture around the
shredder, which can damage the unit.
S Support
If your Martha Stewart
®
MTS-EWC15 electric wood chipper
+ shredder requires service or maintenance, please call
the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
Model + Serial Numbers
When contacting the company or reordering parts, you will
need to provide the model and serial numbers of your product.
These are found on the decal affixed to the housing or handle
of your electric wood c shredder. Copy these numbers
into the space provided below.
Record the following numbers from the housing or handle of your
new product:
Model #:
Serial #:
M T S - E W C 1 5
Summary of Contents for Martha Stewart MTS-EWC15
Page 16: ...snowjoe com ...
