11
Operation
Filling the paint container
1.
Before filling the container, check that the spray gun
assembly is securely attached to the turbine assembly.
2. Unscrew the paint container and remove it from the
container lid (Fig. 7).
3.
Place the container on a smooth and horizontal surface
firmly. Pour the properly thinned and strained material into
the container (Fig. 8).
4.
Clean any residual liquid from the threads or body of
the container.
5.
Align both the paint gun and container, and attach the
lid securely to the top of the container. Tighten securely.
Check the lid to make sure it's threaded on squarely and
securely before picking up the sprayer (Fig. 9).
Align the Suction Tube
Before reattaching the paint container, adjust the direction of
the suction tube based on the direction of the painting project
(Fig. 10). A properly directed suction tube will use the paint
material more efficiently and reduce the need to refill during
the project.
1.
To spray in a downward direction, the angled end of the
suction tube should be pointing toward the front of the
gun (Fig. 11).
Fig. 7
Container lid
Paint container
Fig. 8
Fig. 9
Fig. 10
Suction tube
Summary of Contents for POWERJOE 24V-PS1-RM
Page 20: ...20 NOTES ...
Page 21: ...21 NOTES ...
Page 22: ...22 NOTES ...
Page 24: ...sunjoe com ...
