SNOWJOE POWERJOE 24V-PS1-RM, Operator'S Manual

8

Technical Data

Battery Voltage*

 ...........................................................

 24V D.C.

Battery Capacity ..............................................................

 4.0 Ah

Battery Run Time Max 

 ..................................................

20 mins

Charger Input ....................................................

100 – 240V AC, 

50 – 60 Hz, 50 W

Charger Output  ...................................................

25.2V DC  

1400 mA

Charging Time Max

 ................................................

2 hrs 40 min

Motor ...............................................................................

 210 W

Max Flow ....................................................... 3.2 Gallon/charge

(12 l/charge)

Nozzle Size

 ..........................................

1.5 mm/1.8 mm/2.2 mm

Max Viscosity

 ....................................................

 85 – 100 DIN-s

Paint Container Capacity .....................................

 32 fl oz (1.0 l)

Weight (Paint sprayer alone)

 .............................

2.64 lbs (1.2 kg)

Weight (With battery installed)

 ...............................

4.4 lbs (2 kg)

* Initial no-load voltage, when fully charged, peaks at 24 volts; nominal voltage 

under typical load is 21.6 volts.

Unpacking

Carton Contents

•  Sprayer turbine assembly
•  Spray gun assembly
•  2 nozzle tips (the third one is pre-assembled

inside the paint sprayer)

•  Viscosity cup
•  Spare spray width control level
•  iON+ 24V lithium-ion battery
•  iON+ 24V lithium-ion battery charger
•  Needle clean-out tool
•  Cleaning brush
• 

Manuals with registration card

1.  Carefully remove the cordless paint sprayer and check to 

see that all of the above items are supplied.

2.  Inspect the product carefully to make sure no breakage or 

damage occurred during shipping. If you find damaged or 

missing parts, DO NOT return the unit to the store. Please 

call the Snow Joe

®

 + Sun Joe

®

 customer service center at 

1-866-SNOWJOE (1-866-766-9563).

  NOTE: Do not discard the shipping carton and packaging 

material until you are ready to use your new cordless paint 

sprayer. The packaging is made of recyclable materials. 

Properly dispose of these materials in accordance with 

local regulations.

IMPORTANT!

 The equipment and packaging material are 

not toys. Do not let children play with plastic bags, foils, 

or small parts. These items can be swallowed and pose a 

suffocation risk!

Assembly

m

WARNING!

 Do not insert the battery until assembly is 

complete. Failure to comply could result in accidental starting 

and possible property damage.

m

WARNING!

 Assemble this unit in well ventilated area. 

Make sure there's no flammable vapors 

around.

1. 

Make sure the quick release knob is in the unlock position, 

and insert the spray gun assembly fully inside the opening 

on the end of the sprayer turbine assembly (Fig. 1). 

2.  Push and 

rotate the quick release knob to 

lock in position 

to fix the assembly (Fig. 2). 

Battery Pack Operation

The equipment is powered by a lithium-ion battery. The battery 

pack is completely sealed and maintenance free.

m

WARNING! 

Before first use, the battery requires at least 

2 hrs 40 min charge time to be fully charged. When the battery 

is at low capacity, recharge for 2 hrs 40 min again before 

resuming operation. 

Battery Charge Level Indicator

The battery pack is equipped with a push button for checking 

the charge level. Simply press the push button to read off the 

battery charge level from the LEDs of the battery indicator:

Fig. 1

Quick 

release 

button

Spray gun 

assembly

Turbine

Fig. 2

Lock

Unlock

1

Push in

2

Rotate