background image

10

Battery C Disposal

Disposal

Should your appliance need replacement after extended 

use, do not dispose of it with the household refuse, but in an 

environmentally safe way.

Waste produced by electrical machine items should 

not be handled like normal household rubbish. Please 

recycle where recycle facilities exist. Check with your 

local authority or retailer for recycling advice.

Always dispose of your battery pack according to federal, 

state, and local regulations. Contact a recycling agency in your 

area for recycling locations.

m

CAUTION!

 Even discharged battery packs contain 

some energy. Before disposing, use electrical tape to cover 

the terminals to prevent the battery pack from shorting, which 

could cause a fire or explosion.

m

WARNING! 

To reduce the risk of injury or explosion, 

never burn or incinerate a battery pack even if it is damaged, 

dead, or completely discharged. When burned, toxic fumes 

and materials are emitted into the surrounding atmosphere.

1.  Batteries vary according to device. Consult your manual 

for specific information.

2.  Install only new batteries of the same type in your product 

(where applicable).

3.  Failure to insert batteries in the correct polarity, as 

indicated in the battery compartment or manual, may 

shorten the life of the batteries or cause batteries to leak.

4.  Do not mix old and new batteries.
5.  Do not mix Alkaline, Standard (Carbon-Zinc), or 

Rechargeable (Nickel Cadmium, Nickel Metal Hydride, or 

Lithium-Ion) batteries.

6.  Do not dispose of batteries in fire. The cell of the battery 

may explode. 

7.  Batteries should be recycled or disposed of as per state 

and local guidelines.

S Support

•  Screwdriver service must be performed only by qualified 

repair personnel. Service or maintenance performed by 

unqualified personnel may result in a risk of injury.

•  When servicing the screwdriver, use only identical 

replacement parts. Follow instructions in the cleaning and 

maintenance section of this manual. Use of unauthorized 

parts or failure to follow maintenance instructions may 

create a risk of shock or injury.

•  If your Power Joe

®

 PJ4SDFLX-RM cordless screwdriver 

requires service or maintenance, please call the Snow Joe

®

 

+ Sun Joe

®

 customer service center at 1-866-SNOWJOE 

(1-866-766-9563).

Model + Serial Numbers 

When contacting the company or reordering parts, you will 

need to provide the model and serial numbers of your product. 

These are found on the decal affixed to the housing or handle 

of your cordless screwdriver. Copy these numbers into the 

space provided below.

PJ4SDFLX-CHRG

Federal Communications Commission 

(FCC)

m

WARNING!

 Any changes or modifications to this 

unit not expressly approved by the party responsible for 

compliance could void the user's authority to operate the 

equipment.
Class B device:
NOTE:
 This equipment has been tested and found to comply 

with the limits for a Class B digital device, pursuant to part 15 

of the FCC Rules. 
These limits are designed to provide reasonable protection 

against harmful interference in a residential installation. 
This equipment generates, uses and can radiate radio 

frequency energy and, if not installed and used in accordance 

with the instructions, may cause harmful interference to radio 

communications. 
However, there is no guarantee that interference will not occur 

in a particular installation. 
If this equipment does cause harmful interference to radio or 

television reception, which can be determined by turning the 

equipment off and on, the user is encouraged to try to correct 

the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and 

receiver.

•  Connect the equipment into an outlet on a circuit different 

from that to which the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician 

for help.

Record the following numbers from the housing or handle of your  

new product:

Model #:

Serial #:

P   J   4    S   D   F   L   X    -   R   M

Summary of Contents for POWERJOE PJ4SDFLX-RM

















Reviews: