SNOWJOE POWERJOE PJ4SDFLX-RM, Operator'S Manual

A Division of Snow Joe

®

, LLC

Model PJ4SDFLX-RM

Form No. SJ-PJ4SDFLX-RM-880E-M-V1

OPERATOR’S MANUAL

© 2021 by Snow Joe

®

, LLC

All rights reserved. Original instructions.

SAVE THESE INSTRUCTIONS

1

CORDLESS SCREWDRIVER

4-VOLT MAX | LED LIGHT | BIT KIT | FLEXIBLE BIT EXTENDER

IMPORTANT!

Safety Instructions
All Operators Must Read These 

Instructions Before Use

Always follow these safety guidelines. Failure to do so may 

result in serious bodily injury or death.

General Safety 

m

WARNING!

When using the screwdriver basic safety 

precautions should always be followed to reduce the risk of 

fire, electric shock, and personal injury. These include:

Work Area Safety

1.  Keep work area clean and well-lit – Cluttered, dark 

areas invite accidents.

2.  Keep children, bystanders, and pets away – All 

spectators, including pets, should be kept a safe distance 

away from the work area.

3.  Do not operate power tools in explosive atmospheres 

– Such as in the presence of flammable liquids, gases, or 

dust. Power tools create sparks which may ignite the dust 

or fumes.

Personal Safety

1.  Stay alert – Watch what you are doing. Use common 

sense. Do not operate the screwdriver when you are tired, 

or under the influence of alc ohol or drugs.

2.  Dress properly – Do not wear loose clothing or jewelry. 

They can get caught in moving parts. Loose clothes, 

jewelry, or long hair can be caught in moving parts.

3.  Avoid unintentional starting – Do not carry the 

screwdriver with your finger on the trigger. Make sure the 

switch is off before connecting the screwdriver to power 

source.

4.  Do not overreach – Keep proper footing and balance at 

all times. Proper footing and balance enable better control 

of the cordless screwdriver in unexpected situations.

5.  Use personal protective equipment – Always wear eye 

protection. Protective equipment such as dusk mask, non-

skid safety shoes, hard hat, or hearing protection used for 

appropriate conditions will reduce personal injuries.

6.  Remove accessories or attachments before turning 

screwdriver on – An accessory that is left attached to a 

rotating part of the tool may result in personal injury.

7.  If devices are provided for the connection of dust 

extraction and collection facilities, ensure these are 

connected and properly used – Use of dust collection 

can reduce dust-related hazards.

Tool Use and Care

1.  Do not force the tool – It will perform better with less 

likelihood of personal or mechanical injury if it is used at 

the rate for which it was designed.

2.  Do not use screwdriver if switch does not turn on or 

off – The screwdriver that cannot be controlled with the 

switch is dangerous and must be repaired.

3.  Disconnect the plug from the power source and/or 

battery pack from the screwdriver before making any 

adjustments, changing accessories, or storing the 

screwdriver – Such preventive safety measures reduce 

risk of starting the power tool accidentally.

4.  Store idle screwdriver out of reach of children or other 

untrained persons – Screwdrivers are dangerous in the 

hands of untrained users.

5.  Maintain cordless screwdriver – Check for misalignment 

or binding of moving parts, breakage of parts, and 

any other condition that may affect the screwdriver's 

operation. If damaged, have the screwdriver serviced 

before using. Many accidents are caused by poorly 

maintained tools.

6.  Use the screwdriver, accessories and screwdriver 

bits etc. in accordance with these instructions, taking 

into account the working conditions and the work to 

be performed – Use of the screwdriver for operations 

different from those intended could result in a hazardous 

situation.