SNOWJOE POWERJOE PJ4SDFLX-RM, Operator'S Manual

2

Battery Tool Use and Care

1.  Recharge only with the charger specified by the 

manufacturer – A charger that is suitable for one type 

of battery pack may create a risk of fire when used with 

another battery pack.

2.  Charge internal battery at ambient temperatures 

between 50ºF – 104ºF (10ºC – 40ºC).

3.  Under abusive conditions, liquid may be ejected from 

the battery; avoid contact. If contact accidentally 

occurs, flush with water. If liquid contacts eyes, 

additionally seek medical help – Liquid ejected from the 

battery may cause irritation or burns.

Service

1.  If your power tool requires service, contact an 

authorized Snow Joe

®

 + Sun Joe

®

 dealer or call the 

Snow Joe

®

 + Sun Joe

®

 customer service center at 

1-866-SNOWJOE (1-866-766-9563). Only identical 

replacement parts should be utilized for repairs. This will 

ensure that the safety of the power tool is maintained.

2.  If the battery charger cable is damaged, it must be 

immediately replaced to avoid a hazard. Contact 

the Snow Joe

®

 + Sun Joe

®

 customer service center at 

1-866-SNOWJOE (1-866-766-9563) for assistance.

Safety Rules for Cordless 

Screwdriver

1.  Hold screwdriver by insulated gripping surfaces when 

perfoming an operation where the screwdriver may 

contact hidden wiring or its own cord – Contact with a 

"live wire" will make exposed metal parts of the tool "live" 

and shock the operator.

2.  Use clamps or another practical way to secure and 

support the work piece to a stable platform. Holding 

the work by hand or against your body leaves it unstable 

and may lead to loss of control.

3.  Keep your hair, clothing, and gloves away from air 

vents. Air vents often cover moving parts in which these 

items can be caught.

4.  Make sure approved eye protection is being worn and 

properly adjusted and secured at all times the screwdriver 

is being used. There is a possibility that small pieces of 

metal could shear off from over-tightened screws while 

using the tool.

5.  Keep children at a safe distance while using the cordless 

screwdriver. Distractions can cause inadvertent misuse 

resulting in possible injury to children or to the user.

6.  Use only screwdriver bits that are designed for use with 

this screwdriver. 

7.  Do not plug the AC charger into an outlet where it can be 

exposed to water. Do not lay the screwdriver in or near 

water while it is plugged into the AC charger. Failure to 

comply with this warning can result in severe electrical 

shock or severe burns to anyone who touches the charger 

or the screwdriver.

8.  Use only the AC charger that came with the cordless 

screwdriver. 

9.  Do not attempt to charge the screwdriver if the power 

cord is broken or frayed. Always store the charger in a 

clean dry location until it is needed.

10. Before use, carefully check the screwdriver to determine 

whether it will operate and perform its intended function. 

11. Check for misalignment or binding of moving parts, 

breakage of parts, and any other condition that may affect 

the screwdriver's operation. Do not use the tool if you find 

damaged or missing parts.

12. Do not use the screwdriver if f reverse selector 

switch does not work.

13. Never attempt any repairs youself. It is recommended that 

all repair or replacement for the tool shall be performed by 

a qualified service technician.

14. Do not carry the screwdriver with your finger on the 

f reverse selector switch.

15. Do not abuse battery charger cord.
16. Never carry the charger by its cord or pull the cord to 

disconnect it from the socket.

17. Keep the cord away from heat, oil, and sharp edges.
18. DO NOT store or use the tool in locations where the 

temperature may reach or exceed 105 ºF (40.5 ºC). 

Dangerous storing locations include outdoor sheds or 

metal buildings in the summer.

19. When not in use, store the screwdriver and charger in a 

dry, locked or high place out of reach of children.

20. Keep handles and switches dry, clean and free from oil 

and grease.

B Charger  

Safety Warnings

This manual contains important safety and operating 

instructions for your battery and charger.

1.  Before using the charger, thoroughly read all instructions 

and cautionary markings on the screwdriver.

m

WARNING! 

If the screwdriver housing is cracked or 

damaged, do not insert the charger plug into the power tool, 

or plug the charging adapter into the mains outlet. There is a 

danger of electric shock or electrocution.

2.  This charger is ONLY intended to charge this rechargeable 

battery. Any other use poses a risk of fire, electric shock 

or electrocution.

3.  Do not place any object on top of the charger or place 

the charger on a soft surface that may result in excessive 

internal heat. Keep the charger away from any heat 

source.

4.  To reduce the risk of damaging the electric plug and 

cord, pull the plug, not the cord, when disconnecting the 

charger from the electric outlet.