background image

3

5.  Make sure the battery charging cable is located in a safe 

place so that it will not be stepped on, tripped over or 

otherwise subjected to damage or stress.

6.  An extension cord should not be used unless absolutely 

necessary. Using an improper extension cord poses a risk 

of fire, electric shock or electrocution.

7.  Do not operate the charger if it has received a sharp 

blow or has become damaged in any way. Contact 

the Snow Joe

®

 + Sun Joe

®

 customer service center at 

1-866-SNOWJOE (1-866-766-9563) before continuing 

use.

8.  Do not disassemble the charger. If the charger requires 

service or repair, contact an authorized Snow Joe

®

 +  

Sun Joe

®

 dealer or call the Snow Joe

®

 + Sun Joe

®

 

customer service center at 1-866-SNOWJOE  

(1-866-766-9563). Incorrect reassembly poses a risk of 

electric shock, electrocution or fire.

9.  To reduce the risk of electric shock, unplug the charger 

from the outlet before cleaning the tool.

10. Never attempt to connect two (2) chargers together.
11. The charger is designed to operate on standard 

household electrical power (120 V). Do not attempt to use 

it with any other voltage!

 NOTE: The integrated battery is not fully charged out of 

the carton. Read the safety instructions and then follow 

the charging notes and procedures.

12. Let the tool charge initially for 5 hours. 

m

WARNING! 

Do not use the tool while it is conected to 

the charger.

m

WARNING! 

Fire Hazard. When disconnecting the 

charger from the tool, be sure to unplug the charger from the 

outlet first, then disconnect the charger cord from the tool.

13. The longest life and best performance can be obtained if 

the integrated battery is charged when the air temperature 

is between 64.4ºF – 75.2ºF (18ºC – 24ºC). Do not charge 

the battery pack when the air temperature falls below 

50ºF (10ºC) or above 104ºF (40ºC). Following these safety 

measures will prevent damage to the battery pack.

14. Do not incinerate the integrated battery even if it is 

seriously damaged or completely worn out. The battery 

can explode in a fire.

Summary of Contents for POWERJOE PJ4SDFLX-RM

















Reviews: