SNOWJOE POWERJOE PJ4SDFLX-RM, Operator'S Manual

6

Unpacking

Carton Contents

•  Cordless screwdriver
•  11 pcs of 25 mm driver bits (with bit holder)
•  50 mm Phillips bit
•  50 mm flat-head bit
•  Flexible bit extender
•  Battery charger
•  Manual with registration card

1.  Carefully remove the cordless screwdriver and check to 

see that all of the above items are supplied.

2.  Inspect the product carefully to make sure no breakage or 

damage occurred during shipping. If you find damaged or 

missing parts, DO NOT return the unit to the store. Please 

call the Snow Joe

®

 + Sun Joe

®

 customer service center at 

1-866-SNOWJOE (1-866-766-9563).

  NOTE: Do not discard the shipping carton and packaging 

material until you are ready to use your new cordless 

screwdriver. The packaging is made of recyclable 

materials. Properly dispose of these materials in 

accordance with local regulations.

IMPORTANT! The equipment and packaging material are  

not toys. Do not let children play with plastic bags, foils, 

or small parts. These items can be swallowed and pose a 

suffocation risk!

Before Using

m

WARNING! 

Before first use, the battery requires at least 

5 hours charge time to be fully charged. Recharge for 3-5 

hours again before resuming operation.
NOTE: The charge level indicator LED light will illuminate red 

when the charger is plugged in and is charging the screwdriver. 

When the battery is fully charged, the charging process stops 

and the charging indicator light will automatically turn OFF.

Charging Procedure

m

WARNING! 

The battery charger supplied matches 

the lithium-ion battery installed in the tool. Do not use other 

battery chargers.
To reduce the risk of electric shock, do not allow water to flow 

into the charger's AC/DC plug.

m

WARNING! 

Continued and excessive overuse of the 

ON/OFF trigger switch can permanently damage the lithium-

iON battery.
The charging process starts as soon as the charger is plugged 

into both the proper electrical outlet and the tool.

•  During the charging procedure, the handle of the tool will 

feel slightly warm to the touch. This is normal.

•  When no further use is planned for an extended period of 

time, disconnect the battery charger from the outlet and the 

unit.

•  Do not use the tool during the charging procedure.

Battery Charge Level Indicator

The screwdriver is equipped with a push button for checking 

the charge level. Simply press the push button to read off the 

battery charge level from the LEDs of the battery indicator  

(Fig. 1):

•  (Red, Yellow, Green) All 3 level monitoring LEDs are lit: 

Battery is at full capacity.

•  (Red & Yellow) 2 level monitoring LEDs are lit: Battery is 

at 70% capacity and requires charging soon.

•  (Red) 1 level monitoring LED is lit: Battery is at 30% 

capacity and requires charging.

Battery Charging

The length of service between each charging varies depending 

on the type of work you are doing. The battery in this 

screwdriver has been designed to provide maximum trouble-

free life. However, like all batteries, it will eventually wear out. 

To obtain the longest possible battery life, we suggest the 

following:

•  Store and charge your screwdriver in a cool area. 

Temperatures above or below normal room temperature 

will shorten battery life.

•  Never store the screwdriver with the battery in a 

discharged condition. Recharge the unit immediately after 

it is discharged.

•  All batteries gradually lose their charge. The higher the 

temperature is, the faster they lose their charge. If you 

store your screwdriver for long periods of time without 

using it, recharge the battery every 6 months. This will 

extend battery life.

Fig. 1

Charging 

indicator 

light

Push button 

for battery 

indicator

Lights

Colors

Light Indicators

Red, yellow, green

Full power

Red & yellow

70% power

Red

30% power