3
Assembling the Roof Rake +
Adjusting the Handle
1. Remove the shipping cap from the top of the pole. Retain
for storage (Fig. 1).
2. Unscrew the handle knob and extend the pole to expose
the small holes (Fig. 2).
3. Depress the small buttons at the end of the handle so
that you can insert the handle into the roof rake head
(Fig. 3).
4. Using the hex key wrench, screw the metal braces to the
roof rake head with the two short hex screws (Fig. 4).
5. Affix the metal braces to the pole by threading the long
hex screw through the metal braces and the pole. Secure
the screw with the locking nut using the open end wrench
(Fig. 5).
EN
Fig. 1
Cap
Fig. 2
Hole
Fig. 3
Buttons
Fig. 4
Hex key
wrench
Metal
braces
Short hex
screw
Short hex
screw
Fig. 5
Open
end wrench
Long hex
screw
locking
nut
