SNOWJOE SUNJOE 24V-1500FL-LTE-P1, Operator'S Manual

8

•  Use the battery indicator lights to determine when to charge 

your iON+ 24VBAT-LTE lithium-ion battery pack. 

•  You can "top-off" your battery pack's charge before or after 

a long day of use.

Charging the Battery

1.  Push the push lock buttons on the battery to pull the 

battery pack out from the battery compartment (Fig. 1).

2.  Check that the mains voltage is the same as that marked 

on the rating plate of the battery charger. Then, plug the 

charger adapter into an appropriate AC power outlet. 

Connect the charger plug into the charge socket of the 

battery to start charging (Fig. 2).

3.  The battery will take approximately 5 hours to charge. 

The battery indicator LEDs will twinkle and illuminate one 

by one during the charging process. Unplug the charger 

immediately when the 3 LEDs are all illuminated. 

m

CAUTION!

 FIRE HAZARD. When disconnecting the 

charger from the battery, be sure to unplug the charger from 

the outlet first, then disconnect the charger from the 

battery.

m

WARNING!

 This charger does not automatically 

turn off when the battery is fully charged. 

Please take care 

not to leave the battery plugged into the charger. Switch 

off or unplug the charger at the mains when charging is 

complete.

4.  Timely recharging of the battery will help prolong the 

battery's life. You must recharge the battery pack when 

you notice a drop in the equipment's power.

IMPORTANT! Never allow the battery pack to become fully 

discharged as this will cause irreversible damage to the 

battery. 

Operation

This product is intended for indoor and outdoor illuminating 

purpose. The flash function can also be used to call for help. 

Read the whole manual before operating and adjusting the 

product.

m

WARNING! 

Do not allow familiarity with products to 

make you careless. Remember that a careless fraction of a 

second is sufficient to inflict serious injury.

Starting the Spotlight

m

WARNING! 

Do not direct the light beam at persons 

or animals and do not stare into the light beam yourself (not 

even from a distance). Staring into the light beam may result in 

serious injury or vision loss.

1. 

Insert the battery into the battery compartment (Fig. 3). 

2.  Grab and hold the handle grip. Squeeze the switch to 

turn on the light. The switch will click and the light will  

illuminate. When the light is on, release the switch (Fig. 4).  

Fig. 1

Battery pack
Battery lock button

Fig. 2

Battery 

indicators

Fig. 3

Battery pack