9
Switch Between the Light Modes
The spotlight features 5 illumination modes – spotlight, high
floodlight, spot + floodlight, warning light, low floodlight. To
switch between the light modes, simply keep pressing and
releasing the switch until it reaches the desired mode. The
light mode will change with each press of the switch as shown
below:
Refer the table below for details about each light mode.
Fig. 4
Switch
Spotlight
High
Floodlight
Warning
Light
Spot +
Floodlight
Low
Floodlight
OFF
This mode casts a narrow
beam of light with an
output of 1000 Lumens.
This beam is more
concentrated and easier
to point and control. It is
a particularly strong light
source that produces a
cone of light.
Spotlight
This mode casts a beam
spread of a much wider
angle, with an output of
750 – 800 Lumens. It can
light up a larger amount of
space.
High
Floodlight
This is the most strong
light mode, with all LEDs
working to cast a 1500
Lumens output. This
mode can provide lighting
for wide area and long
distance.
Spot +
Floodlight
In this mode, the flood
LED will blink SOS in
Morse code. Use this
mode for any emergency.
Warning
Light
Low
Floodlight
This mode casts a wide
and short beam spread,
with an output of
30 Lumens.
Light
Mode
LED Pattern
APPLICATION
