10
5. Timely recharging of the battery will help prolong the
battery's life. You must recharge the battery pack when
you notice a drop in the equipment's power.
IMPORTANT! Never allow the battery pack to become fully
discharged as this will cause irreversible damage to the
battery.
6. When charging is complete, remove the battery from the
charger by pulling the push lock button and sliding the
battery backward to unlock it from the charger.
Operation
m
WARNING!
Always wear safety goggles when
operating the air compressor. Failure to do so could result
in objects being thrown into your eyes, resulting in possible
serious injury.
m
WARNING!
Do not use any attachments or accessories
not recommended by the manufacturer of this air compressor.
The use of attachments or accessories not recommended can
result in serious personal injury.
m
WARNING!
The air compressor is capable of inflating
to 120 PSI, 8.27 BAR, or 827 kPa max. To avoid over inflation,
carefully follow instructions on items to be inflated. Never
exceed recommended pressures. Use only recommended air
handling parts acceptable for pressure not less than 120 PSI.
m
CAUTION!
Do not leave items to be inflated unattended
while air compressor is in use. These items can burst and
could cause serious injury.
m
WARNING!
The air compressor is not designed to
inflate large volume items such as boats, pools, rafts, large air
beds, etc. It is also not designed for commercial application.
m
WARNING!
Since the pressure display is not calibrated,
and is therefore not binding for exact values, tire pressure must
be checked using a calibrated measuring device before driving
a vehicle with vehicle tires inflated with the air compressor.
m
WARNING!
Risk of injury. Do not direct air stream at
body.
m
WARNING!
Hot surface. To reduce the risk of burns, do
not touch metal clamps of hose assembly.
Inflating with the Air Hose
The air chuck on the air hose can be used without adapters to
inflate tires or with any item with a valve stem that fits the air
chuck opening.
1. Place air chuck on valve stem (Fig. 4).
2. Push air chuck down so that the threaded section of the
valve stem is inside the air chuck (Fig. 4).
3. Clamp the end of the air chuck down onto the valve stem
by pressing air chuck clamp down until it stops or is
parallel with the air hose.
4. To remove, lift air chuck clamp and remove air chuck from
valve stem (Fig. 5).
Inflating with the Air Hose and Adapters
The air hose can be used with the provided adapters to inflate
a variety of items.
1. Insert adapter into air chuck and push air clamp down
until it locks into place (Fig. 6).
2. To remove, lift air chuck clamp and remove adapter from
air chuck (Fig. 6).
Fig. 4
To lock
Air chuck
Air chuck clamp
Air hose
Valve stem
Fig. 5
To unlock
Air chuck
clamp
Air chuck
Air hose
Valve stem
Air chuck
To unlock
To lock
Presta valve adapter
Tapered
adapter
Sport ball
needle
Fig. 6
