background image

9

Know Your Cordless Pole Chain Saw

Read the owner’s manual and safety instructions carefully before operating the cordless pole chain saw. Compare the illustration 

below to the cordless pole chain saw in order to familiarize yourself with the location of the various controls and adjustments. 

Save this manual for future reference.

*Initial no-load voltage, when fully charged, peaks at 24 volts; nominal voltage under typical load is 21.6 volts.

Technical Data

Motor  ..............................................................................  250 W
Battery Voltage* Max  .................................................  24 V D.C.
Battery Capacity  ..............................................  See page 21 for 

 

battery options and specifications

Battery Runtime Max  .......................................  See page 21 for 

 

battery options and specifications

Charger Input ...................................................  See page 21 for 

 

battery options and specifications

Charger Output  ................................................  See page 21 for 

 

battery options and specifications

Charge Time Max  ............................................  See page 21 for 

 

battery options and specifications

No Load Speed  .........................................................  1800 rpm
Bar Chain Length  ............................................. 10 in. (25.4 cm)
Cutting Thickness Max  .................................... 9.5 in. (24.1 cm)

Recommended: 8.5 in. (21.6 cm)

Multi-Angle Head  .......................................................... 0º + 30º
Telescopic Pole  .................................................... 3.6 ft to 6.9 ft 

(1.1 m to 2.1 m)

Overhead Reach  .............................................. Up to 13 ft (4 m)
Oil Tank Capacity  .............................................

 1.7 fl oz (50 ml)

Weight (pole chain saw alone)  ..............................  8 lbs (3.6 kg)

1.  Battery compartment
2. 

On/Off switch

3.  Safety lock button
4.  Bar sheath
5.  Multi-angle head adjustment dial
6.  10-inch (25.4 cm) guide bar
7.  10-inch (25.4 cm) cutting chain
8.  Oil level indicator window
9.  Oil tank cap

10. Multi-angle head
11. Telescoping pole cam-lock (2)
12. Telescoping pole (2)
13. Shoulder strap
14. Shoulder strap bracket
15. Rear handle
16. Chain tensioner ring
17. Chain/sprocket end cover knob
18. Chain/sprocket end cover

R

R

R

4
5

8

7

6

9

10

11 12

13

14

15

1

2

3

17

18

16

FRONT

24VBAT-LTE

24VBAT-LT

24VBAT-LTE

24VBAT

24VBAT-XR

24VBAT-LT

24VCHRG-QC

24VCHRG-DPC

SOLD SEPARATELY

B Charger options available at sunjoe.com

Summary of Contents for Sunjoe 24V-PS10-CT-RM

























Reviews: