background image

21

Optional Accessories

m

WARNING!

 ALWAYS use only authorized Snow Joe

®

 + Sun Joe

®

 replacement parts and accessories. NEVER use 

replacement parts or accessories that are not intended for use with this cordless pole chain saw. Contact Snow Joe

®

 +  

Sun Joe

®

 if you are unsure whether it is safe to use a particular replacement part or accessory with your cordless pole chain saw. 

The use of any other attachment or accessory can be dangerous and could cause injury or mechanical damage.

iON+ 24V lithium-ion Battery Quick 

Charger 

iON+ 24V lithium-ion Dual-port  

Battery Charger 

24VBAT-LTE

24VCHRG-QC

24VBAT-LT

24VBAT

24VBAT-XR

Model

Accessories

Item

1

2

3

4

5

6

7

8

24V iON+ 1.3 Ah Lithium-Ion Battery 

Charge times vary by charger. See website for details.
Battery Runtime Max: 8 min (up to 16 cuts per charge) 

24VBAT-LTW

24V iON+ 1.5 Ah Lithium-Ion Battery 

Charge times vary by charger. See website for details.
Battery Runtime Max: 11 min (up to 22 cuts per charge)

24VBAT-LTX

24V iON+ 2.0 Ah Lithium-Ion Battery 

Charge times vary by charger. See website for details. 

Battery Runtime Max: 15 min (up to 30 cuts per charge)

24V iON+ 2.5 Ah Lithium-Ion Battery 

Charge times vary by charger. See website for details.
Battery Runtime Max: 18 min (up to 36 cuts per charge)

24V iON+ 4.0 Ah Lithium-Ion Battery 

Battery Charge Time Max:
Charge times vary by charger. See website for details.
Battery Runtime Max: 30 min (up to 60 cuts per charge)

24V iON+ 5.0 Ah Lithium-Ion Battery 

Charge times vary by charger. See website for details.
Battery Runtime Max: 35 min (up to 70 cuts per charge)

24VCHRG-DPC

Summary of Contents for Sunjoe 24V-PS10-LTE-RM

























Reviews: