background image

7

Know Your Cordless Hedge Trimmer

Read the owner’s manual and safety rules carefully before operating your cordless hedge trimmer. Compare the illustration  

below to the actual unit in order to familiarize yourself with the location of the various controls and adjustments. Save this  

manual for future reference.

3

2

5

1

8

7

9

10

13

14

15

12

11

4

6

Technical Data

Motor .................................................................

60 Watt

Battery Voltage* .................................................24 V D.C.
Battery Capacity ................................................2.0 Ah
Battery Runtime Max  ........................................

1 hr 15 min

Charger Input ....................................................100 – 240 V AC, 

 

50/60 Hz, 0.4 A

Charger Output  ........................................26 V DC  

  450 mA

Charge Time Max .....................................

5 hours

Blade Length ............................................

7 in. (18 cm)

Blade Material  .........................................

65Mn steel blades

Cutting Diameter Max ..............................

0.3 in. (7.8 mm)

No Load Speed ........................................

1150 rpm

Weight (with battery installed)

 ..................

3.1 lbs (1.4 kg) 

*Initial no-load voltage, when fully charged, peaks at 24 volts; nominal voltage under typical load is 21.6 volts.

1.  Hedge trimmer blades
2.  Motor housing
3.  Safety lock button
4.  Hedge trimmer handle
5.  ON/OFF trigger switch
6.  Battery compartment
7.  Blade cover
8.  Hedge trimmer blade sheath

9.  iON+ 24V lithium-ion charger  

(XZ2600-0450)

10.

 Charger plug

11. Battery indicators
12. Push button for battery indicator
13. Push lock button
14. iON+ 24V lithium-ion battery (24VBAT-LTE) 

featuring exclusive EcoSharp

®

 technology

15. Charge socket

Summary of Contents for Sunjoe 24V-SSEG-LTE

















Reviews: