SNOWJOE SUNJOE 24V-X2-CS16-CT, Operator'S Manual

13

3.  Insert both the batteries in the battery compartment  

(Fig. 9).

4. 

To turn the tool on, hold the chain saw firmly with both 

hands on the handles. Press the safety lock button, 

then squeeze the trigger switch. When the chain saw is 

running, you can release the safety lock button (Fig. 10). 

5. 

To turn the tool off, simply release the trigger switch. 

  NOTE: Do not squeeze the trigger switch until you are 

ready to make a cut.

Working Load Indicator

The machine is equipped with an working load indication 

system located behind the front hand brake (Fig. 11), which will 

be illuminated immediately when battery is installed. Consult to 

the table below for the indication of the working status of the 

chain saw.  

NOTE: If an overload situation happens and the machine 

cuts off automatically, switch the machine off and remove the 

batteries. Let the machine and batteries cool down for a while 

before resuming work.  

Operating Tips

m

WARNING! 

For your safety and that of others:

1.  Do not use the machine without reading the instructions 

carefully. Become acquainted with the controls and 

the proper use of the machine. Learn how to stop the 

machine quickly.

2. 

Keep in mind that the operator or user is responsible 

for accidents or hazards occurring to other people or  

their property.

3.  Always wear suitable clothing when using the machine. 

Wear anti-vibration gloves and other personal  

protective equipment.

  All the above-mentioned precautions do not, however, 

guarantee the prevention of certain risks – i.e. Raynaud’s 

phenomenon or Carpal tunnel syndrome. For operators 

who use this machine for prolonged periods, it is 

therefore recommended to have periodic checkups 

on their hands and fingers. If any of the above 

mentioned symptoms should appear, please contact a 

physician immediately.

4. 

Work only in daylight or good artificial light.

5.  Take utmost care when working near metal fences.
6.  Take care not to hit the bar hard against foreign objects or 

flying debris caused by the movement of the chain.

7.  Stop the motor and remove the batteries from  

the compartment:

–

  Whenever you leave the machine unattended; 

–

  Before cleaning, checking or servicing the machine;

–  After striking a foreign object. Inspect the machine  

for any damage and make repairs before restarting  

it again;

–  If the machine begins to vibrate abnormally,  

immediately look for the cause of the vibrations  

and have the machine inspected at an authorized  

Snow Joe

®

 + Sun Joe

®

 dealer or call the Snow Joe

®

Battery pack

Fig. 9

Battery compartment

Safety lock 

button

Fig. 10

Trigger switch

Working load 

indicator

Fig. 11

The saw is ready to make a cut

Light Indicators

Lights

Yellow

The saw is working properly

Green

The saw is overloaded. Stop working 

immediately; Otherwise the circuit is going to 

cut off automatically in 2 seconds

Red