SNOWJOE SUNJOE CJ602E, Operator'S Manual

8

6.  Repeat the steps 2 – 4 to assemble the other wheel.   

Stand Assembly Fitting

1.  Turn the wood c shredder main body upside 

down, insert the two ends of the stand assembly into the 

housing (Fig. 6). 

2.  Align the holes on the main body housing and stand 

assembly, insert the washer into the screw and install into 

the stand assembly on both sides (Fig. 7). 

Fitting the Paddle Holder and the Paddle

1.  Stand the unit up, and clip the paddle holder to the 

standing assembly (Fig. 8).

2.  Clip the paddle into the paddle holder (Fig. 9).  

NOTE: Be sure to place the paddle in the paddle holder every 

time after using. 

Operation

St Stopping

m

WARNING!

 Before starting, ensure that the feed inlet 

is empty.

m

WARNING!

 The wood c shredder will not run 

if the hopper is open or not closed tightly. Always close the 

hopper tightly by turning the hopper locking knob clockwise 

before starting the machine (Fig. 10).
 

Fig. 5

Wheel cover

Wheel

Fig. 6

Main body

Stand 

assembly

Fig. 7

Washer

Screw

Fig. 8

Paddle holder

Standing 

assembly

Fig. 9

Paddle 

holder

Paddle