SNOWJOE sunjoe iON100V-18CS-CT, Operator'S Manual

11

3. Loosen the brake by pulling it towards the front handle. 

Using a screwdriver, run the chain along the guide to 

check that it moves smoothly.

Chain Lubricant

IMPORTANT! Only use a good quality bar and chain oil 

designed specifically for use with chain saws to ensure optimal 

lubrication of the cutting parts. Do not use oil containing 

impurities to avoid clogging the tank filter and permanently 

damaging the oiler.
IMPORTANT!

 The chain lubricating oil is bio-degradable. The 

use of mineral oil or engine oil can have a serious impact on 

the environment. It is essential that you use good quality oil to 

lubricate the cutting parts effectively. Used or poor quality oil 

does not guarantee good lubrication and reduces the lifespan 

of the chain and bar. 
IMPORTANT! Before each machine use, the oil level should 

be checked and topped up to 1 cm from the rim of the 

filler. To fill the oil tank, remove the oil tank cap and add the 

recommended bar and chain oil. The oil level must not drop 

below the "L" level mark, as indicated on the oil tank (Fig. 12).

Battery Pack Operation

The equipment is powered by a lithium-ion battery (sold 

separately). The battery pack is completely closed and 

maintenance free. 

In order to operate this chain saw, you will need to additionally 

purchase  either  the  iON100V-2.5AMP  or  iON100V-5AMP 

lithium-ion  battery  and  the  100  V  quick  charger  (model 

iON100V-RCH).  Battery  and  charger  options  available  at 

snowjoe.com.

CORE TOOL

B CHARGER SOLD SEPARATELY

Battery Charge Level Indicator

The battery pack is equipped with a push button for checking 

the charge level. Simply press the push button to read off the 

battery charge level from the LEDs of the battery indicator  

(Fig. 13):

•  All 4 level monitoring LEDs are lit: Battery charge level 

is high.

•  3 level monitoring LEDs are lit: Battery charge level is 

decreasing. 

•  2 level monitoring LEDs are lit: Battery charge level is 

decreasing. Stop work as soon as possible.

•  1 level monitoring LED is lit: Battery is flat. Stop work 

IMMEDIATELY and charge the battery. Otherwise the 

battery’s service life will be greatly shortened.

Fig. 11

R

Fig. 12

Oil level  

window

Oil tank cap

Fig. 13

Charge level indicator push button

Press