5
Tending the Fire
You may need to shift and/or add logs for an ideal fire pit
experience. DO NOT place a hot protective screen cover or hot
fire pit tools onto combustible surfaces such as grass, wooden
decks, or furniture.
1. Using the screen hook that is provided and heat-resistant
gloves, carefully remove the protective screen.
2.
Using a long-handled fire pit tool, shift the coals and logs
to allow for additional air flow.
3.
DO NOT add gasoline, kerosene, diesel fuel, lighter fluid,
or alcohol to relight or enhance an existing fire.
4.
Use a match to light the kindling or fire-starter.
5. Wait until glowing coals have developed before adding
any additional wood. If additional wood is required, place
the wood on top of the coals, taking care not to shift the
ashes.
Extinguishing
1.
Let the fire burn itself out.
2.
DO NOT use water to extinguish the fire. Such action is
dangerous and can cause irreversible damage to the fire
pit.
Inspecting
This fire pit should be inspected on a regular basis to ensure
product safety and longer product life.
m
DO NOT attempt to inspect this fire pit until the fire is
COMPLETELY out and the fire pit has COMPLETELY cooled.
1.
Check components for any signs of damage or rust.
2. If damage to any component is detected, DO NOT use the
fire pit until repairs are properly performed.
Cleaning
This fire pit should be cleaned on a regular basis to promote
safer experiences and longer product life.
NOTE:
After repeated use, a slight discoloration of the finish
may occur.
DO NOT attempt to clean this fire pit until the fire is
COMPLETELY out and the fire pit has COMPLETELY cooled.
DO NOT use oven cleaner or abrasive cleaners as they will
damage this product.
DO NOT clean any part of this fire pit in a self-cleaning oven as
this may damage the finish.
1.
Wipe exterior surfaces with a mild dish washing detergent
or baking soda.
2. For stubborn surfaces, use a citrus-based degreaser and
a nylon scrubbing brush.
3. Rinse and clean with water.
4. Remove built-up creosote from components with a
chimney cleaning product.
Storage
DO NOT move or store this fire pit until the fire is
COMPLETELY out and the fire pit is cool to the touch.
1.
Once the fire is out, the coals have completely cooled,
and the fire pit can be safely handled, remove and
properly dispose of the ashes.
2.
Store the fire pit in a clean and dry location to maximize
product life.
3.
Store the fire pit assembled in a safe location away from
children and pets.
Support
If your Sun Joe
®
SJFP28-STN-CL cast stone fire pit requires
service or maintenance, please call 1-866-SNOWJOE
(1-866-766-9563) for assistance.
Model and Serial Numbers
When contacting the company, reordering parts, or arranging
service from an authorized dealer, you will need to provide
the model and serial numbers, which can be found on the
decal located on the unit. Copy these numbers into the space
provided below.
Record the following numbers from your new product:
Model #:
Serial #:
S J F P 2 8 - S T N - C L
