SNOWJOE SUNJOE SPX9006-PRO, Operator'S Manual

8

  NOTE: Be sure to retain the oil inlet nut in event that the 

pressure washer needs to be transported. 

  NOTE: Use the oil inlet nut when transporting the pressure 

washer. Before using the pressure washer again, you must 

reinstall the oil measuring plug.  

4.  Fit the spray wand into the trigger gun and rotate it until 

the two parts are completely locked (Fig. 4).

5.  Insert the connecting hose into the opening on the hose 

reel, as shown, until it clicks securely in place (Fig. 5).

6.  Connect the other end of the connecting hose to the 

water outlet (Fig. 6). 

7.  Connect the high-pressure hose to the trigger gun (Fig. 7).

m

WARNING! 

Keep hose away from sharp objects. 

Bursting hoses may cause injury. Examine hoses regularly and 

replace if damaged. Do not attempt to mend a damaged hose.

8.  Thread your garden hose (male end) into the garden 

hose adapter (Fig. 8). The garden hose must have an 

internal diameter of at least 13 mm (1/2 in.) and must be 

reinforced. The water supply must be at least equal to the 

washer delivery capacity.

NOTE: The machine is not suitable for connection to the 

potable water main.

Fig. 3

Oil 

measuring 

plug

Fig. 4

Spray wand

Trigger gun

Opening

Connecting 

hose

Fig. 5

Water outlet

Connecting hose

Fig. 6

High-pressure hose

Trigger gun

Fig. 7