SNOWJOE sunjoe SWJ806E, Operator'S Manual

10

Chain Saw Assembly

1.  To remove the cutting head from the telescoping pole, 

PULL the cutting head lock back to release, and grasping 

the front hand grip, SLIDE UP to remove the cutting head 

(Fig. 14). 

2.  To remove the handle from the telescoping pole, pull the 

handle lock back to release, and SLIDE DOWN to remove 

the handle (Fig. 15). 

3.  Connect the cutting head with the removable handle by 

aligning their ends together and slide the cutting head 

downward until it clicks into position (Fig. 16). 

m

WARNING!

 Always make sure that the handle lock is 

locked securely before using the chain saw. 

Operation

Starting and Stopping

m

CAUTION!

•  Before starting the saw, remove the oil tank cap and add 

bar & chain oil to the top of the oil level window  

(Fig. 1

7

). One minute of use will consume approximately  

0.15 fl oz (4 ml) of oil. Refill when the oil level drops to 

1/4 of a tank.

  NOTE: Your electric pole + chain saw is equipped with an 

automatic oil pump for bar and chain oiling. You must add 

bar and chain oil or your electric pole + chain saw will not 

function.

• 

Starting, stopping, and restarting an electric motor 

repeatedly within a few seconds can generate a great deal 

of heat and damage the motor. To protect the life of your  

electric pole + chain s

aw, always wait at least five seconds 

after stopping before restarting the saw.

m

WARNING!

Be sure that the chain is not in contact with 

any object when you start the motor.

m

WARNING!

 Keep hands away from chain. Keep hands 

on handles. Do not overreach.

A good, firm grip on the tool using both hands will help you 

maintain control. When using as a pole chain saw, place one 

hand on the soft grip and the other hand on the removable 

handle with your thumbs and fingers encircling the pole and 

handle. 

When using as a chain saw, maintain a firm grip by 

placing your right hand on the rear handle and left hand on the 

front handle with thumbs and fingers encircling the respective 

handles. 

A firm grip combined with proper positioning of the 

handle against your body will help you maintain control of the 

saw. Do not let go of the saw while it is in operation.

R

Fig. 14

Removable cutting head

Cutting 

head lock

Front hand grip

Fig. 15

Telescoping pole

Handle lock

Removable handle

R

Fig. 16

Removable 

handle

Removable cutting head

R

Fig. 17

Oil level 

window

Minimum level mark

Oil tank cap