SNOWJOE SUNJOE SWJ807E-RM, Operator'S Manual

4

•  Watch for shifting of wood or other forces that may pinch the 

chain.

•  Use extreme caution when re-entering a previous cut.
•  Use the low-kickback chain and guide bar supplied with 

this 2-in-1 pole + chain saw. Only use genuine Snow Joe

®

+ Sun Joe

®

 replacement parts designed specifically for 

use with this 2-in-1 pole + chain saw.

•  Never use a dull or loose chain. Keep the chain sharp and 

properly tensioned.

• 

Follow the manufacturer’s sharpening and maintenance 

instructions for the saw chain. Decreasing the depth 

gauge height can lead to increased kickback.

•  Always observe the safety regulations and follow the 

correct sawing techniques.

• 

Ensure safe carrying of the unit. Whenever the machine is 

to be handled or transported, you must:

–

  Switch off the motor and wait for the chain to come to  

a complete stop;

–

  Mount the guide bar cover;

–

  Hold the machine using the hand grips and  

position the bar in the opposite direction to that used  

during operation.

  When using a vehicle to transport the machine, fasten the 

tool firmly and position it so that it is not a danger to any 

passengers.

•  Before cutting, pruning, or delimbing for the first time, 

make sure:

–

  You have been specifically trained to use this type 

of equipment;

–

  You have carefully read the safety regulations and  

user instructions contained in this manual;

–

  You practice first on logs on the ground or attached 

to trestles/saw horses, in order to get familiar with the  

machine and the proper cutting techniques.