SNOWJOE sunjoe TJ601E-RM, Operator'S Manual

10

Operation

Intended Use

This machine is intended for breaking up and tilling coarse 

soil for the purpose of mixing in fertilizer, peat and compost in 

domestic areas. Any use other than that specifically named in 

this manual may lead to damage to the tool and represents a 

serious injury hazard for the operator.
The operator or user of the tool is responsible for any damage 

or injury caused to other persons or property. Adults should 

only operate the machine. Children and persons unfamiliar with 

the manual must not be allowed to use the tool. Do not use 

the tool in rain or damp surroundings. The manufacturer shall 

not be held liable for damage arising from improper use or 

incorrect operation of the tiller.

Wheel Adjustment

m

WARNING!

 Always switch the product off and 

disconnect it from the power supply before making any 

adjustments.

The wheels can be adjusted to 7 different positions to control 

the cultivating depth.

To change from transport position to the tilling position

1.  Pull out the cotter pin and slide out the bolt, then remove 

the wheel assembly completely, as indicated by the arrow 

(Fig. 8).

2.  Flip the wheel assembly over, and re-insert the wheel 

setting into the bracket hole assembly, this time from the 

top of the unit, as indicated by the arrow (Fig. 9).

3.  Adjust and align the wheel setting hole to the bracket hole, 

then insert the bolt and secure it with the cotter pin  

(Fig. 10).

m

WARNING!

 Always ensure the wheels are securely 

locked. Do not attempt to use the product with the wheels in 

unlocked positions.

Connecting to Power Supply

NOTE: Before using this machine, make sure that the power 

source you will use complies with the specifications detailed in 

this manual.

m

WARNING!

 Carelessness, mishandling or error on 

the part of the operator may result in bodily injury (e.g.: 

amputation, projectile impact), or death. The tiller must be 

operated according to the warnings and guidelines in this 

manual.

Fig. 8

Cotter pin

Bolt

Wheel 

assembly

Fig. 9

Bolt

Wheel 

assembly

Wheel 

setting

Bracket

hole

Fig. 10

Tilling setting