SNOWJOE sunjoe TJ601E-RM, Operator'S Manual

8

Unpacking

Carton Contents

•  Electric cultivator housing
•  Left handle grip 
•  Right handle grip 
•  Middle handle
•  Plastic cross plate
•  Handle knob and bolt (6)
•  Cable clip
• 

Screw (2)

•  Manual with registration card

1.  Carefully remove the electric cultivator and check 

to see that all of the above items are supplied.

2.  Inspect the product carefully to make sure no breakage or 

damage occurred during shipping. If you find damaged or 

missing parts, DO NOT return the unit to the store. Please 

call the Snow Joe

®

 + Sun Joe

®

 customer service center at 

1-866-SNOWJOE (1-866-766-9563

).

  NOTE: Do not discard the shipping carton and packaging 

material until you are ready to use the electric  

cultivator. The packaging is made of recyclable materials. 

Properly dispose of these materials in accordance with 

local regulations or save the packaging for long-term 

product storage.

IMPORTANT! The equipment and packaging material are not 

toys. Do not let children play with plastic bags, foils, or small 

parts. These items can be swallowed and pose a suffocation 

risk!

Assembly

m

WARNING!

 Do not connect to the power supply 

until assembly is complete. Failure to comply could result in 

accidental starting and serious personal injury.

m

WARNING!

 Before performing any maintenance, make 

sure the tool is unplugged from the power supply. Failure to 

heed this warning could result in serious personal injury.

m

WARNING!

 To prevent serious personal injury, 

make sure the switch is in the OFF (O) position, the unit is 

unplugged, and the blades have come to a complete stop 

before inspecting, cleaning, or servicing the unit.

m

WARNING!

 The product must be fully assembled 

before operation. Do not use a product that is only partially 

assembled or assembled with damaged parts.

Follow the assembly instructions step-by-step and use the 

pictures provided as a visual guide to easily assemble the 

product.

Connecting the Handles

NOTE: Reference to right or left side of the tiller is determined 

from behind the unit in the operating position. The "operating 

position" is defined as standing directly behind the tiller.

NOTE: Small parts can easily get lost during assembly or when 

making adjustments to the machine. To avoid this, secure all 

small parts that are removed from the box or machine and 

keep them accessible.

1.  Slide the right-hand grip and left-hand grip into the plastic 

cross plate by matching the holes in the back of the grips 

with the holes in the back of the cross plate (Figs. 1 – 3).

  NOTE: Use a phillips-head screwdriver. Aligning the holes 

may be difficult. We recommend fastening one hand grip 

at a time to the cross plate. 

Fig. 1

Right hand grip

Left hand 

grip

Plastic cross plate

Fig. 2

Align the bottom of beam with 

the white line on the side of upper 

handle before tightening 2 screws