SNOWJOE SUNJOE TJ602E-RM, Operator'S Manual

8

Unpacking

Carton Contents

•  Electric cultivator housing
•  Upper handle
•  Middle handle
•  Extension cord restraint holder
•  Cable clip
•  Handle knob, spacer and bolt (4)
•  Manual with registration card

1.  Carefully remove the electric cultivator and check to 

see that all of the above items are supplied.

2.  Inspect the product carefully to make sure no breakage or 

damage occurred during shipping. If you find damaged or 

missing parts, DO NOT return the unit to the store. Please 

call the Snow Joe

®

 + Sun Joe

®

 customer service center at 

1-866-SNOWJOE (1-866-766-9563).

  NOTE: Do not discard the shipping carton and packaging 

material until you are ready to use the electric  

cultivator. The packaging is made of recyclable materials. 

Properly dispose of these materials in accordance with 

local regulations or save the packaging for long-term 

product storage.

IMPORTANT! The equipment and packaging material are not 

toys. Do not let children play with plastic bags, foils, or small 

parts. These items can be swallowed and pose a suffocation 

risk!

Assembly

m

WARNING!

 Do not connect to the power supply 

until assembly is complete. Failure to comply could result in 

accidental starting and serious personal injury.

m

WARNING!

 To prevent serious personal injury, make 

sure the unit is unplugged, and the blades have come to a 

complete stop before inspecting, cleaning, or servicing the unit.

m

WARNING!

 The product must be fully assembled before 

operation. Do not use a product that is only partially assembled 

or assembled with damaged parts.

Follow the assembly instructions step-by-step and use the 

pictures provided as a visual guide to easily assemble the 

product.

Connecting the Handles

NOTE: Small parts can easily get lost during asembly or when 

making adjustments to the machine. To avoid this, secure all 

small parts that are removed from the machine and keep them 

accessible.

1.  Attach the cable clip on the middle handle bar (Fig. 1).

2.  Remove the bolts from the knobs and keep them handy.
3.  Secure the middle handle to the lower handle using the 

first set of knobs, spacers and bolts (A). Tighten the knobs 

on each side to ensure a secure fit (Fig. 2).

Fig. 1

Cable clip

Middle handle

Fig. 2

Knob + 

bolt 

Middle handle

Lower handle

A

A