SNR-VG-6040 User Manual
Copyri
ght © 2012 NAG LLC
Page 12 of 25
Device Mode
This parameter controls whether the device is working in
NAT router mode or Bridge mode. Need save the setting
and reboot the device before the setting start to work
LAN Subnet Mask
Sets the LAN subnet mask. Default value is 255.255.255.0
LAN DHCP Base IP:
Base IP for the LAN port which functions as a Gateway for
the subnet. Default value is 192.168.22.1
DHCP IP Lease Time:
Value is set in units of hours. Default value is 120hr (5
Days) The time IP address are assigned to the LAN clients
Port Map
Forwards a matching (TCP/UDP) port to a specific LAN IP
address with a specific (TCP/UDP) port
End User Password
This contains the password to access the Web
Configuration Menu. This field is case sensitive.
Reply to ICMP on WAN
port
If set to “Yes”, the SNR-VG-600x will respond to the PING
command from other computers, but it also is vulnerable
to the DOS attack. Default is
No
.
Wan Side Http Access
If this parameter is set to “No”, the HTML configuration
update via WAN port is disabled.
5.3
Super User Settings
The end-user needs to login to the Super user configuration page the same way as for the
basic configuration page.
FIGURE 4: Screenshot Of Super User Configuration
5.3.1 Super Configuration Page Definitions
Super Options
Setting options
Definitions
Admin Password
This contains the password to access the Advanced
Web Configuration page. This field is case sensitive.
Only the administrator can configur
e the “Advanced
Settings” page. Password field is purposely left blank for
