Snugr SmartDrive MX, Installation And Operating Instructions Manual

7 Disposal

SmartDrive MX
Installation and operating instructions

Version 1.1 - May 2014

15

7 Disposal

SmartDrive MX and batteries do not belong in domestic waste. They must be 
disposed of according to country-specific guidelines and laws. That way, you 
contribute to the protection of the environment and support sustainable recycling 
of raw materials.

8 Trouble shooting

If the SmartDrive MX does not work properly follow the sequence of operations 
described below in order to remedy the fault:

1

Check whether the SmartDrive MX was correctly assembled.

2

Remedy the fault by following the check list.

8.1 Check list for breakdown

 on page 15

8.1

Check list for breakdown

Message

Error / possible cause 

Rectification

!17 

Measurement failed / an error occurred during 
temperature detection.



If this error happens repeatedly, get in contact 
with customer services.

!18 

Batteries empty / predefined voltage threshold not 
reached



Replace the batteries

!20

Frost protection / Temperature has dropped 
below 10 °C.



Insufficient heating performance Close the 
window or check the heating system, as the 
case may be.

!33 

Problems with lift adjustment; blocked valve actuator 



Check, whether the valve tappet is running 
well; contact customer services, as required

!36 

Error during adapting; tappet contact was not triggered 
/ blocked valve actuator or valve not running properly



Check, whether the valve tappet is running 
well; contact customer services, as required

!40 

Error during adapting; valve was not detected / limit 
position was not detected / valve not running properly 
or unsuitable



Check, whether the SmartDrive MX was 
mounted rigidly; contact customer services, as 
required.

!49 

No controller; address not known at centre



Carry out reset, repeat teaching process; 
contact customer services, as required

!53

Telegram not fetched / connection to centre interrupted



Change the position of the central unit or use a 
repeater.

!54

Storage of centre address failed / teaching process 
unsuccessful



Contact a service representative

table 4

Check list breakdown