6
Vers. 005 Feb 2020
heat sources that may affect the ambient temperature in the area where the
equipment is installed.
During any work with the chain conveyor there must be adequate work lighting.
During any work with the machine, respiratory masks, safety shoes, hearing
protection and other required safety precautions that may be required by the
local workplace assessment should be used, where the chain conveyor is
installed.
When assembling machines, heavy lifting may occur. Persons setting up the
machine must read the assembly /user manual first. Suitable lifting equipment
must be used in connection with installation and assembly.
Gloves must be used while handling the machine as there is a risk of sharp
edges.
The equipment must not be exposed to larger dust loads (dust layers) than
permitted in EN60079-14.
Beware that if the chain conveyor is expected to run empty for more than 5
minutes, a dry-running sensor must be fitted to ensure that the machine stops.
Also, it must be ensured that the machine outlets are not clogged. As SRL60
chain conveyor as standard is not mounted with an overflow sensor, it will
depend on the motor protection if the chain conveyor is clogged.