SECTION 4
NORMAL PROCEDURES
SOCATA
MODEL TB 20
The content of this document is the property of
socata
. It is supplied in
confidence and commercial security of its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor
may information contained in it be disclosed to unauthorized persons. It must not
be reproduced nor transmitted in any form in whole or in part without permission
in writing from the owners of the Copyright.
Information in this document is subject to change without notice.
© 1988, 1991, 1992, 1994 to 1996, 1997, 2000 -
socata
- All rights reserved
June 30, 1988
Revision 8
4.11
AFTER STARTING ENGINE
ELECTRICAL POWER CHECK :
”ALTr FLD” switch–breaker OFF
– ”ALTr” warning light
ON
– Voltmeter
Yellow sector
”ALTr FLD” switch–breaker ON
– ”ALTr” warning light
OFF
– Voltmeter
Green sector
Turn and bank indicator (if installed)
ON
Vacuum gage (if installed)
Checked
Advisory panel test
Positive
Landing gear indicator lights test
Positive
”Radio master” (if installed)
ON
All radios and navaids
ON
Fuel selector
Check engine operation
(minimum 1 minute) on each tank
Fuel selector
Set to fullest tank
Flaps
Checked and RETRACTED
DAY OPERATION :
Air conditioning switch
(if installed)
”AIR COND”
if air conditioning required
NIGHT OPERATION :
Air conditioning switch
(if installed)
”OFF”
TAXIING
Parking brake
Release
Brakes
Checked
Flight instruments
Checked
Taxi light
As required
Avoid exceeding 1200 RPM as long as the oil temperature
indicator pointer is within yellow sector.
