Loop Test
9
overview
The reasons for Polarity Test are covered in detail at the front of this User Guide.
To carry out the test apply firm (thumb) pressure to the Polarity Test Pad. (Please
note this is a fixed pad it will not depress). The 3 Socket Test LED’s should flash
GREEN - everything is correctly wired
including Polarity (live and earth/neutral
are in the right place).
If the LED’s change to RED when you operate the Touch Pad - it is possible a very
dangerous condition is present and the relevant electricity supply company should
be informed immediately of this indication.
This Polarity indication diagram is a reminder for the correct and incorrect polarity
condition.
GOOD
POSSIBLE
FAULT
