Socket CHS 7Ci Quick Start Manual Download

Page: 7 / 12

Android OS

SPP Mode

Compatible with Android 2.1 to 4.1. For HID instructions (compatible with Android 2.2 to

4.1 devices with HID support), please see User’s Guide.

To install the software:

If you installed barcode scanning software for your phone camera, scan

this barcode to launch the SocketScan 10 page in Android Market.

Alternatively, open Android Market or Amazon Appstore for Android

and search for SocketScan.

Follow the on-screen instructions to download and install SocketScan 10 software.

If prompted, allow the application to access Bluetooth connections and settings and/or

modify USB storage / SD card contents.

To pair and connect the CHS and Android device:

(required only the first time you connect)

Power on the CHS. Scan this barcode to change the CHS to SPP mode. The CHS will beep 3

times.

Turn on Bluetooth on your Android device. Make sure it is Discoverable and start a device

search / scan for devices.

In the list of found devices, touch

Socket CHS

. If a pop-up appears, touch

Pair & connect

If prompted for a passkey, enter

0000

(four zeroes).

Touch

Home

| Menu | Settings | Language & keyboard

Locale & text

. Make

sure

SocketScan 10

is selected.

Open

SocketScan 10

. For some devices, an icon will appear on the Home screen.

For other devices, touch

Menu

and open

Apps

Programs

A message will tell you to enable SocketScan 10 as your input method. Touch

Back

Touch

Menu | Input Method

. Make sure

SocketScan 10

is selected.

Touch

Menu |

Socket EZ Pair

. Touch

1D Scanner

. In the device list, touch

Socket CHS

After the CHS connects and is ready to scan barcodes, it will beep once. The icon at the

top of the screen will also change (see below). Touch

Back

Status Bar Icon

CHS not connected.

CHS connected.

10.

A CHS registration icon

will also appear on top of the screen. Swipe the icon

down to open the registration software.

11.

Follow the instructions to register the software, or touch

Cancel

to register later.

Now you are ready to scan barcodes. See instructions on page 4.

To connect to a new computer / device, you must first unpair the CHS. See page 4.

Print page to scan.
Do not scan onscreen.

Summary of Contents for CHS 7Ci













Search results

Summary of Contents for CHS 7Ci

Reviews:

Related manuals for CHS 7Ci

Brands by name

Popular brands

Socket CHS 7Ci, Quick Start Manual

Search results

Summary of Contents for CHS 7Ci

Reviews:

Related manuals for CHS 7Ci

Brands by name

Popular brands