3 | Setup for Windows Mobile
This chapter explains how to install and use the
Cordless Ring Scanner (CRS) with a
Bluetooth
enabled Pocket PC or other Windows Mobile-
based device.
Before you begin the instructions in this chapter,
make sure you have charged and installed the
battery as explained in Chapter 2, “Hardware
Preparation.”
Setup Summary
STEP 1: Install the software.
STEP 2: Configure scanner settings.
STEP 3: Connect CRS to host device with
Bluetooth
.
STEP 4: Assemble and put on the CRS.
STEP 5: Scan data into your application.
OPTIONAL:
•
Select symbologies.
•
Configure prefix/suffixes.
•
Configure sound.
•
Run Scan Demo.
CHAPTER 3: SETUP FOR WINDOWS MOBILE
15