3
|
I
NSTALLING
A
UTHENTICATION
C
ERTIFICATES
IMPORTANT!
This step is needed only for WPA and WPA2 Enterprise networks,
which require authentication certificates! LEAP and EAP-FAST do not
require authentication certificates.
Install a Root Certificate
1.
If you have not done so already, get a root (server) certificate from your
network administrator. It must come from a Trusted Root Authority (not
an intermediary authority).
2.
Use a serial/USB cable or cradle and synchronization software (Windows
Mobile Device Center or ActiveSync) to make an active connection
between your device and host PC.
If you only need to install a root certificate, you may want to use a
memory card instead
.
3.
Use
My Computer
or
Windows Explorer
to access your
Mobile
Device
and copy the root certificate onto your device.
4.
On your device, use
File Explorer
to navigate to the location of the root
certificate. Tap on the file.
5.
When asked if you want to install the certificate. Tap
Yes
.
•
If your network requires only a root certificate, disconnect your device from
the host PC. Soft reset the device by pressing the reset button.
•
If your network also requires a personal certificate, follow the
instructions on the next page using a LAN connection. Do not use Wi-Fi.
8
