110
Appendix B
Using the Scan Params WinCE Utility
You can use Scan Params to effectively modify the settings in your Socket barcode scanner via the symbology
parameters and requisite data on pages 8-69.
Note:
Parameters 0x36 and 0x37, for enabling/disabling CLSI and NOTIS editing respectively, do not work with
Socket barcode scanners with the Motorola (Symbol) CSE-600 engine.
Get Data and Set Data
The two main functions of the Scan Params utility are Get Data and Set Data. As their names imply Get Data
retrieves the current state of a particular parameter and Set Data will set it. 00 represents false and 01
represents true. Below the Parameter and Data fields is the message box which will display the results of the
Get Data and Send Data functions.
Persistence
The Persistent check box enables you to ensure that your modifications will persist beyond a power loss.
Checking the box causes Scan Params to write the parameter data into the flash memory on that card thereby
preventing the setting from reverting to the previous value when power is lost.
Connecting a Socket Bluetooth Barcode Scanner
To connect the Bluetooth Cordless Hand Scanner or Bluetooth Cordless Ring Scanner, ensure that your
Bluetooth
device is active and ready to make a connection. Then start the Scan Params utility and tap the CS
menu then tap Connect CS. You can disconnect the scanner by returning to the CS menu and tapping
Disconnect CS.
Note:
Leaving the Scan Params utility will disconnect the scanner.
