3.
Use the utility to configure your settings.
•
Leave screen enabled
: Select to keep the screen on when the hold
switch is activated. A dialog will confirm the hold switch is activated.
Tapping
ok
or deactivating the hold switch will close the dialog.
When the SoMo is reset, this option is automatically re-enabled.
•
Disable backlight
: Select to keep the screen on but disable the
backlight, recommended for conserving battery life.
•
Disable auto-suspend
: Select to keep the SoMo alive when the hold
switch is activated, regardless of settings chosen in the Power applet.
Use this option with caution to avoid accidental battery depletion.
•
Launch program when switch is activated/deactivated
: Use the
menu to select a program for the SoMo to automatically launch
when the hold switch is activated (in the down position) or
deactivated (in the up position).
4.
After entering your settings, tap
ok
.
CHAPTER 2: GETTING STARTED
21
