-12-
Configuration
The
Configuration
tab contains several fields where the current parameters of the Wireless
LAN CF Card can be viewed and changed. You will see current configuration information in
terms of ESSID, Network Type, Power Saving Mode and Tx Rate. Upon modification of
parameters for the Wireless LAN CF Card, click the
Apply
button to make the changes take
effect.
ESSID
The ESSID is an unique ID given to the Access Point. Wireless clients associating to Access
Points must have the same ESSID. The default value
Auto Detect
means when the Wireless
LAN CF Card starts to work, it will associate with any Access Point that gives the fastest
response. You may also enter a specific ESSID (Access Point) you desire to connect with. It
is recommended that you specify an ESSID for your Wireless LAN CF Card. This will prevent
your computer from unintentionally connecting to a different wireless network. The ESSID
can be set up to
32 characters
and is case sensitive.
Network Type
There are 3 network types for the 11Mbps Wireless LAN PC Card to operate. If you need to
access company network or Internet via Access Point, select “
Infrastructure
”. To set up a
group of wireless stations for file and printer sharing, select “
Ad-Hoc
” or “
802.11 Ad-Hoc
”
(without Access Point). If
Ad-Hoc (without access point)
is selected, you need to set wireless
stations with the
same channel
. For
802.11 Ad-Hoc
,
the
same ESSID
are required to the
wireless stations.
PDF created with FinePrint pdfFactory Pro trial version
http://www.fineprint.com
