-18-
4
This section describes the installation of the 11Mbps Wireless LAN CF Card driver for the
Windows XP/2000/NT/98/ME operating systems. The installation procedures for Windows
XP refer to
4
-3 Set up Wireless LAN CF Card for Windows XP
; for Windows 2000 please see
4-4 Set up
Wireless LAN CF Card for Windows 2000;
for Windows NT please go to
4-5 Set up
Wireless LAN CF Card for Windows NT;
for Windows 98/ME refer to
4-6 Set up Wireless LAN
CF Card for Windows 98/ME.
Note
:
Before you start the installation, you are advised to keep the Windows
CD-ROM in case you might need certain system files.
4-1 System Requirements
In order to use the 11Mbps Wireless LAN CF Card, your computer must be equipped with the
following:
1. A PCMCIA Type II slot, and a PCMCIA card and socket services compliant with revision
2.10 of the PCMCIA specification (or higher).
2. Windows 98/ME/NT/2000/XP (with a Windows installation CD-ROM, diskettes for use
during installation)
3. Minimum 500 Kbytes free disk space for installing driver and utility program.
4-2 Insert the Wireless LAN CF Card
Step 1:
If your PC has a compact flash type II slot, simply insert the Wireless LAN CF Card
into the CF slot. If not, use the CF/PCMCIA Adapter as stated in the next procedure.
Step 2:
Firmly insert the 11Mbps Wireless LAN CF Card into the CF/PCMCIA Adapter,
figured as below. Then insert the 11Mbps Wireless LAN CF Card into the PCMCIA slot of
your computer.
Install the CF Card for
Windows XP/2000/NT/98/ME
PDF created with FinePrint pdfFactory Pro trial version
http://www.fineprint.com
