-43-
Thus, the RTS Threshold mechanism provides a solution to prevent data collisions. When you
enable RTS Threshold on a suspect “hidden station”, this station and its Access Point will use a
Request to Send/Clear to Send protocol (RTS/CTS). The station will send an RTS to the
Access Point, informing that it is going to transmit the data. Upon receipt, the Access Point
will respond with a CTS message to all station within its range to notify all other stations to
defer transmission. It will also confirm the requestor station that the Access Point has reserved
it for the time-frame of the requested transmission.
If the “Hidden Node” problem is an issue, please specify the packet size.
The RTS mechanism
will be activated if the data size exceeds the value you set.
It is highly recommended that you
set the value ranging from 0 to 1500. The default value is
Disable
.
Note:
Enabling RTS Threshold would cause redundant network overhead that
could negatively affect the throughput performance instead of providing a remedy.
Frag. Threshold
Fragmentation mechanism is used for improving the efficiency when high traffic flows along
in the wireless network. If your 11Mbps Wireless LAN CF Card often transmit large files in
wireless network, you can enable the Fragmentation Threshold by clicking the
Enable
button
and the mechanism will split the packet. The value can be set from 256 to 1500. The
default value is
Disable
.
IRQ NO./IO Address
To avoid device conflict, you may modify the IRQ No. and IO Address for your device (Only
available under Windows NT).
PDF created with FinePrint pdfFactory Pro trial version
http://www.fineprint.com
